MagAO Commissioning Day 7: ASM First Light.

Our crew is getting kind of big. Todays new arrivals were: Phil Hinz, Simone Esposito, and Enrico Pinna.

Now it's a party. Enrico, Simone, and Phil arrived just in time for lunch.

This morning we finished balancing the telescope, and collimated it. We also installed our new wind meter directly under the ASM.

Laird and Juan attaching the wind probe.

To prepare for moving the NAS, we officially took over the Clay control room.

Armando, Povilas, Vizzy, Alfio, and Marco hard at work in the control room.

The big task after lunch was to install the NAS. We reviewed the procedure with the whole crew.

Laird conducts the procedure review prior to mounting the NAS.

We first had to wait for the Mike guider to finish coming off the telescope.

Emilio, Nelson, Juan, and Miguel removing a piece of Mike.

Awaiting our turn.

Installing the NAS went smoothly. We’ve done this once before, so it was a good chance to test the procedure we developed last time. In this video we are raising the NAS from the dome floor up to the Nasmyth platform.

Once we had the NAS installed, we attached the new and improved Anaconda for the first time.

Tyson and Povilas attaching the Anaconda to the NAS.

Here we're checking to make sure that our electronics boxes, especially the all important VisAO, clear the Igus thingy.

We also did a live test of the “Snake Pit”, the box that holds the loop of the Anaconda as it coils under the NAS platform. Our current solution is really more of a sketch.

You get the idea. The final solution will be made out of metal.

The Anaconda in its pit.

After getting the NAS mounted, we turned it over to Povilas to start testing the guider.

Povilas and Emilio checking out the guider.

Shack-Hartmann spots on our guider CCD.

Finally, we opened the dome and pointed at some stars. This was the first time that real starlight bounced off our adaptive secondary mirror – First Light on the ASM! The fantastic result of the tests we did are that we can focus the ASM with the normal travel range of the vane ends (the structure that holds our ASM above the primary).

Here’s the scene in the Clay control room during our first nighttime operations:

The Clay control room on MagAO's first night.

Povilas was able to collimate the telescope, and obtain ~0.65 arcsec images on the guider. A big night!

A 0.65" seeing limited image on the MagAO guider CCD.

SH spots on the MagAO guider.

Some random snippets of today’s conversations:

Povilas: “It worked. It doesn’t matter whether I approve.” (note: this has been added to the MagAO support agreement as rule #1).

Tyson: “You’re makin’ me nervous.”
Laird: “Well, you’re making me nervous.”

Laird: “Just as long as everybody remembers not to stick their whatevers in there.”

Alan: “If it clears, it clears.”

Derek: “My wide field lens is performing 2% better than the theoretical limit.”
Jared: “You’re wrong.”

Derek took a walk around Clay today:

While mounting the wind monitor, the primary mirror covers were open with the telescope at horizon. This was an opportunity to pose for souvenir photos in front of a 6.5 meter mirror.

Alan presents the Magellan Clay Telescope.

Laird and Simone pose for a shot by Enrico.

Laird and Jared contemplate the primary.

Laird and Derek, with Juan looking on.

Finally, we note that this is the 100th post to our blog. Thanks for reading!

This entry was posted in Uncategorized. Bookmark the permalink.