It Begins: Clio Unpacking

The invasion of LCO has begun. A scouting party consisting of Manny Montoya and Richard Sosa arrived this weekend and began unpacking the Clio2 infrared camera. Here is their report:

Day 1: “Clio was unpacked yesterday morning and we confirmed that nothing was damaged in shipping. Clio was put on the vacuum pump and we confirmed that we had not lost vacuum. The electronics rack and other stuff was unpacked and accounted for. The electronics rack cabling was tied down a little more securely since this was not possible before it left Tucson, and we also confirmed that nothing had broken during shipping. One thing that did get a little tweaked was the monitor and keyboard support to rack were bent. We straightened them out and put nuts behind it to make it more secure. The rack was then plugged into Clio and the computer, temp. controller, motor control were all tested, checking both the physical conection and through the runclio command on the gui. We then plugged into the network, it was not working so Emilio helped us with the vlan connection.”

Manny checking out Clio2 in the cleanroom.

Day2: “This morning we took the ring up to the telescope and confirmed that it fit on the MagAO NAS. We also checked the flower box to window measurements, we still have to check these with Clio to confirm there are no collision points, but the ring did fit. After the ring was confirmed to fit, we took it back down and put Clio2 and its cart together. This afternoon we are moving everthing into the clean room to prepare for cooling of Clio2 tommorow.”

Richard checks that the Clio2 mounting ring fits. It's nice when we drill the holes in the right place the first time.

Proof that this is actually happening at LCO. Clay and Baade behind Manny as he escorts the ring back down to the clean room.

Clio2 and the mounting ring being mated.

Clio2 all ready to go. Just needs a cooldown.

Stay tuned for more MagAO action.

This entry was posted in Clio, Hardware. Bookmark the permalink.